More Tumbling blocks, laid out on Nancy's dining room table yesterday after lunch. One was the wrong way round, i notice now.

How to Make Tumbling Blocks

I used 2.5" strips, but you can obviously use any size you want. You'll need Light, dark and medium. I sometimes contrasted cool and warm, when the dark and medium were only slightly different in value. I especially like using Kaffe Fassett stripes for the mediums, as they add more dimension, without being too loud. For a kid's quilt, you might try using a feature fabric for the medium.

Use a 60° angle template (or the marks on your cutting board, if you have them), for the first cut.

I used a template with inches marked on it, to cut the parallelograms at 2.5" intervals in the strips.
You can make a template out of cardboard, marking 1/4" seam allowances on it and then making holes where the lines cross.

This you can use to mark where your seams should start and stop when you're sewing the blocks together. Once you've done stacks of them, you probably won't need the marks anymore, but it helps to get started.
Sew just one side of a light and dark together.

Take care that the pieces are arranged according to how you want them to be placed in the block. In this case: dark will be lower left, light on top, etc.


Sew the medium onto the light, with a pin to mark where the seam between light and dark is.
Pivot at this point and then sew medium to dark, being careful that the dark remains in the proper allignment when you pivot, so that the seam turns exactly where light and dark meet and the medium and dark pieces match up exactly.
Also, be careful not to stretch the bias cut edges while sewing!


This strip piecing tutorial for Tumbling Blocks looks promising and i started to try it, but then realized it's better suited to a project that isn't so scrappy, i.e. with just three fabrics, like for a baby quilt. Also, i preferred the aesthetics of this method. After all, sometimes the viewer is not galloping by on a horse!

Take care that the pieces are arranged according to how you want them to be placed in the block. In this case: dark will be lower left, light on top, etc.


Sew the medium onto the light, with a pin to mark where the seam between light and dark is.
Pivot at this point and then sew medium to dark, being careful that the dark remains in the proper allignment when you pivot, so that the seam turns exactly where light and dark meet and the medium and dark pieces match up exactly.
Also, be careful not to stretch the bias cut edges while sewing!


This strip piecing tutorial for Tumbling Blocks looks promising and i started to try it, but then realized it's better suited to a project that isn't so scrappy, i.e. with just three fabrics, like for a baby quilt. Also, i preferred the aesthetics of this method. After all, sometimes the viewer is not galloping by on a horse!

Finally had time for a bit more sewing. I'd been longing to try these tumbling blocks and had been collecting fabrics for them for a while. Many of these came from Brigitte's shop.

From the campus at Bremen where the semester started last week. My classrooms are all way out in the boonies this time, but the walk there is scenic and good exercise..

A reversible keyboard cover. Been meaning to make one of these for a while. I used some of my favorite fabrics, things i was tempted to save for more important projects for other people. I decided, hey, i'm important too! Besides, how do i know they would even like these fabrics?

Well, my little holiday from the internet was productive. I managed to get lots done. This week i couldn't resist sewing a little again and started on a new quilt, but it's Top Secret, so i can't post pictures of it. Sadly, I've had to put it aside again until i finish a bunch of work-related stuff. There are a zillion other projects i'm longing to get to as well, including a radio flyer quilt.